- 3″ (80 mm) wide high-precision screwless vise
- 10 Pairs of 3″ long thin parallels
- Two mounting clamps to secure the vise to your mill table
- Vise and parallels are hardened to RC 58-62
This high precision toolmakers screwless vise has a one-piece body. The body and jaws are hardened to Rc 58-62. All sides are flat, square and parallel to 0.0002″. There are horizontal and vertical vees on the inside face of the movable jaw to hold round objects. The jaws are 1.38″ deep and open to 3.78″ capacity. The vise is 7.28″ long, 2.76″ tall and 3.00″ wide.
The set of 10 pairs of thin parallels are 1/8″ thick and 3″ long. Heights are 1/2″, 5/8″, 3/4″, 7/8″, 1″, 1-1/8″, 1-1/4″, 1-3/8″, 1-1/2″, and 1-5/8″. They are made of high grade alloy steel hardened to 52 to 58 Rc. The top and bottom surfaces are parallel within 0.0002″. The pairs are matched in height within 0.0004″.
The pair of clamps is used to mount a screwless vise on your mill table. You furnish T-slot nuts and socket head cap screws (up to 3/8″ diameter) of the appropriate length for your mill. These clamps are height-adjustable so they will work with any screwless vise with 8 mm (5/16″) or larger holes. You can also use these clamps in the slots that are in the end of most screwless vises
| Jaw Depth | 1.38″ (35.1 mm) |
| Maximum Jaw Opening | 3.78″ (96.0 mm) |
| Weight | 13.3 lbs (6.0 kg) |
| Height with Out Base | 2.76″ (70.1 mm) |
| Length | 7.28″ (184.9 mm) |
| Width with Out Base | 3″ (76 mm) |
