Vise, 3″ Screwless with Hold Down Clamps

• High precision 3″ wide screwless vise
• Clamps to secure to vise to your mill table
• Vise is hardened and precision ground
• Jaw opening capacity is 3.78″
• Clamps are height adjustable

This high precision screwless vise with hold down clamps has a one-piece body. The body and jaws are hardened to Rc 58-62. All sides are flat, square and parallel to 0.0002″. There are horizontal and vertical vees on the inside face of the movable jaw to hold round objects.

The jaws are 1.38″ deep and open to 3.78″ capacity.

The vise is 7.28″ long, 2.76″ tall and 3.00″ wide.

The pair of clamps is used to mount this toolmakers vise on your mill table. You furnish 3/8″ socket head cap screws of the appropriate length for your mill, and T-slot nuts.

These clamps are height-adjustable so they will work with any screwless vise with 8 mm (5/16″) or larger holes. You can also use these clamps in the slots that are in the end of most screwless vises.