- Bench lathe tailstock handwheel
- Fits SIEG SC4 and HiTorque bench lathes
- 80 mm outside diameter
- Fits 12 mm shaft with a 4 mm key
- Bore is 22 mm, handle threading is M6
Tailstock handwheel for the HiTorque Bench Lathes and SIEG SC4 bench lathes. The hand wheel is 80 mm in diameter. It mounts on a 12 mm shaft, with a 4 mm key. The length through the bore is 22 mm. There is an M6 threaded hole for a handle.
See Used On tab for reference to machines using this handwheel and the drawing number.
