Fall Safety KitFull Body Harness with 6ft Shock Absorbing Lanyard
Full Body Harness | 6ft Shock Lanyard | Dual Snap Hooks | Storage Bucket | OSHA Compliant
The Core Connection Between Worker and AnchorHarness and Lanyard Ready to Work
Every fall protection system needs two fundamental components: something to wear and something to connect. The fall safety kitalso called a harness and lanyard kit, personal fall limiter kit, fall arrest starter kit, contractor safety kit, and worker protection kitprovides both in one package. The full body harness distributes arrest forces across the worker’s shoulders, chest, and legs rather than concentrating impact on the spine. The 6-foot shock absorbing lanyard connects the harness to the anchor point and limits the forces transmitted to the worker during a fall. Together, these components form the personal connection in a fall arrest systemthe worker wears the harness, the lanyard connects to the anchor, and the system is ready to protect. For gutter contractors who need to connect workers to existing anchor points, horizontal lifelines, or scaffolding, the harness and lanyard kit provides the essential personal protective equipment without the additional components needed only for vertical lifeline systems. GutterAll supplies fall safety kits to gutter contractors and general contractors throughout the Pacific Northwest and nationally from the Damascus, Oregon location.
Full Body Harness | 6ft Shock Lanyard | Dual Snap Hooks | Storage Bucket Included
Key Benefits at a Glance
Full Body Harness
Distributes forces across body.
Shock Absorbing Lanyard
Limits arrest forces to worker.
6ft Working Length
Mobility with protection.
Storage Bucket
Organized transport to job sites.
The Problem with Improvised ConnectionsWhy Proper Harnesses and Lanyards Matter
Falls happen fast. A worker who slips on a wet roof edge, steps on debris, or loses balance while reaching has less than half a second before impact. In that moment, the only thing between the worker and the ground is whatever equipment connects them to the structure. A rope tied around the waist concentrates all arrest forces on the spine and internal organs. A non-shock-absorbing connection transmits the full impact of the fall to the worker’s body. Improvised equipment fails when it matters most.
The full body harness solves the force distribution problem. When a fall occurs, the harness spreads the arrest forces across the shoulders, chest, thighs, and pelvisthe parts of the body that can absorb impact without catastrophic injury. The dorsal D-ring positions the connection point at the center of the back, keeping the worker upright during arrest rather than folding them forward or backward.
The shock absorbing lanyard solves the force magnitude problem. When a worker falls, they accelerate. Stopping that acceleration instantly transmits massive forces to the bodypotentially fatal forces. The shock absorber inside the lanyard extends during arrest, slowing the deceleration and limiting the maximum force transmitted to the worker to 1,800 pounds or less. The fall safety kitalso known as a harness and lanyard kit, personal fall limiter kit, fall arrest starter kit, contractor safety kit, and worker protection kitprovides both components together, ready to connect to an anchor point. For gutter contractors working from scaffolding, aerial lifts, or structures with existing anchor points, this kit provides the personal protective equipment needed for fall protection without the vertical lifeline components used for ladder climbing and roof access. GutterAll supplies fall safety kits to gutter contractors and general contractors throughout the Pacific Northwest and nationally. Contact [email protected] for contractor pricing. Available for in-store pickup at 19759 SE Sunnyside Rd, Damascus, OR 97089, local delivery in the Portland metro area, or shipping to all 50 states.
Why This MattersThe Physics of Falls and Why Equipment Design Saves Lives
A 180-pound worker who falls 6 feet generates approximately 5,400 pounds of force at the end of a non-shock-absorbing connection. That force is enough to cause fatal internal injuries even if the equipment holds. The human body cannot survive instantaneous deceleration at those force levels. This is why OSHA requires that fall arrest systems limit maximum arrest force to 1,800 poundsthe threshold below which properly distributed forces are survivable.
The shock absorbing lanyard achieves this force reduction through controlled extension. The shock pack contains webbing that tears out under load, extending the lanyard by 3 to 4 feet during arrest. This extension increases the stopping distance, reducing the deceleration rate and limiting the peak force. The full body harness then distributes this reduced force across the body rather than concentrating it at a single point.
The fall safety kit provides both componentsthe force reducer (lanyard) and the force distributor (harness)as a matched system. For gutter contractors, the kit is the personal protective equipment that makes the difference between a survivable arrest and a catastrophic injury. The anchor point provides the connection to the structure. The harness and lanyard provide the connection to the worker. Both are essential.
Full body harness. 6ft shock lanyard. Dual snap hooks. Storage bucket included.
Start a chat now or email [email protected] for contractor pricing.
What’s in the KitComplete Contents
Kit Purpose: This kit provides the personal protective equipment for fall arrestthe harness worn by the worker and the lanyard that connects to the anchor. The anchor point itself (roof anchor, scaffold tie-off, horizontal lifeline, etc.) is provided separately based on the specific application. This kit is ideal for contractors who already have anchor systems in place.
How the System WorksFrom Anchor to Worker
Harness Function: The full body harness wraps around the worker’s torso and legs with straps at the shoulders, chest, and thighs. When a fall occurs and the lanyard goes taut, these straps distribute the arrest force across multiple contact points. The dorsal D-ringlocated at the center of the back between the shoulder bladesis the fall arrest connection point. This position keeps the worker upright during arrest and directs forces through the strongest parts of the harness structure.
Lanyard Function: The 6-foot shock absorbing lanyard connects the harness D-ring to the anchor point. During normal work, the lanyard allows the worker to move within a 6-foot radius of the anchor. When a fall occurs, the snap hooks hold, the webbing goes taut, and the shock pack activates. The shock absorber extends by tearing out internal webbing, which slows the deceleration and limits peak arrest force to 1,800 pounds maximumthe OSHA-required threshold for survivable arrest.
Connection Points: The lanyard has dual snap hooksone connects to the harness dorsal D-ring, the other connects to the anchor point. Both connections must be secure before work begins. The 6-foot length limits potential free fall distance when the anchor is at or above the worker’s D-ring height.
Work ApplicationsWhere Harness and Lanyard Kits Provide Protection
The fall safety kit provides personal fall arrest equipment for applications with existing anchor points:
Contractor Insight: For gutter contractors working from scaffolding or aerial lifts, the harness and lanyard kit provides the personal protective equipment needed without the vertical lifeline components. If the work involves ladder climbing or vertical access where a rope grab system is needed, consider a complete bucket kit with lifeline and anchor instead.
Harness. Lanyard. Shock Absorber. Dual Snap Hooks. Storage Bucket.
Start a chat for fastest response or email [email protected]
Fall Safety Kit vs. Complete Bucket KitChoosing the Right System
Selection Guide: Choose the fall safety kit when you have existing anchor points and need personal protective equipment for fixed-position work. Choose a complete bucket kit when you need the anchor, vertical lifeline, and rope grab for ladder climbing and roof access applications.
Key Features and User Benefits
The Fall Safety Kitalso known as a harness and lanyard kit, personal fall limiter kit, fall arrest starter kit, contractor safety kit, and worker protection kitprovides the personal protective equipment essential for connecting workers to anchor points. The kit includes a full body harness with dorsal D-ring for proper fall arrest connection, and a 6-foot shock absorbing lanyard with dual snap hooks for connecting to both the harness and the anchor point. The shock absorber limits maximum arrest force to 1,800 pounds, meeting OSHA requirements for survivable fall arrest. The storage bucket keeps equipment organized, protected, and easy to transport to job sites. For gutter contractors working from scaffolding, aerial lifts, or structures with existing anchor points, this kit provides the personal connection between worker and anchor that makes fall protection possible. When combined with a properly rated anchor, the harness and lanyard form a complete fall arrest system. GutterAll supplies fall safety kits to gutter contractors and general contractors throughout the Pacific Northwest and nationally. Contact [email protected] for contractor pricing on quantity orders. Available for in-store pickup at 19759 SE Sunnyside Rd, Damascus, OR 97089, local delivery in the Portland metro area, or shipping to all 50 states. Monday through Friday 7am to 4pm, Saturday 8am to 12pm PST.
Why Contractors Use Fall Safety Kits:
- Full Body Harness: Distributes arrest forces across shoulders, chest, and legs
- Dorsal D-Ring: Proper fall arrest connection point at center back
- Shock Absorbing Lanyard: Limits arrest force to 1,800 lbs maximum
- 6-Foot Working Length: Standard work radius from anchor point
- Dual Snap Hooks: Connect to harness and anchor simultaneously
- OSHA Compliant: Meets federal fall protection standards
- ANSI Rated: Meets industry safety standards
- Storage Bucket: Portable, organized equipment transport
- Adjustable Harness: Fits various worker sizes
- Scaffold Compatible: Works with scaffold anchor points
- Aerial Lift Compatible: Works with boom and bucket truck anchors
- Horizontal Lifeline Compatible: Lanyard slides along cable systems
- Quick Connection: Snap hooks for fast anchor attachment
- Equipment Protection: Bucket keeps gear clean and organized
- Local Pacific NW Stock: Available from Damascus, Oregon
Product Specifications
Who Uses Fall Safety Kits
Gutter Installation Contractors (Primary)
- Scaffolding-based gutter work
- Aerial lift gutter installations
- Fixed anchor roof work
- Fascia and soffit repairs
- Commercial building access
- Crew equipment standardization
Why it matters: Gutter contractors working from scaffolding or aerial lifts need personal fall protection that connects to existing anchor points. This kit provides the harness and lanyard without duplicate components when anchors are already in place.
Roofing Contractors (Primary)
- Fixed anchor roof work
- Horizontal lifeline systems
- Low-slope roof maintenance
- Roof inspection tie-off
- Equipment positioning
- Supplemental crew equipment
Why it matters: Roofing contractors with permanent roof anchors or horizontal lifeline systems need personal equipment for each worker. The harness and lanyard kit provides the worker connection without redundant anchor components.
General Contractors (Secondary)
- Scaffold platform work
- Boom lift operations
- Bucket truck work
- Structural steel tie-off
- Building exterior access
- Occasional elevated work
Why it matters: General contractors often use scaffolding or aerial lifts with built-in anchor points. The harness and lanyard kit provides personal fall protection without the vertical lifeline components that are not needed for these applications.
Usage GuideFall Safety Kit
- Inspect harness before each use: Check all webbing for fraying, cuts, burns, abrasion, or chemical damage. Inspect buckles and hardware for proper operation. Check D-ring for cracks, corrosion, or deformation.
- Inspect lanyard before each use: Check webbing and shock pack for damage. Verify snap hooks open, close, and lock properly. Ensure shock pack is not deployed (has not already arrested a fall).
- Don the harness: Step into leg straps and pull harness up over shoulders. Fasten chest strap. Adjust shoulder straps, leg straps, and chest strap for snug but comfortable fit. Verify dorsal D-ring is centered between shoulder blades.
- Verify anchor point: Confirm anchor point is rated for fall arrest (5,000 lbs per worker or designed by a qualified person). Anchor should be at or above the worker’s dorsal D-ring height to minimize fall distance.
- Connect lanyard to harness: Attach one snap hook to the dorsal D-ring on the harness. Verify hook closes completely and locks.
- Connect lanyard to anchor: Attach the other snap hook to the anchor point. Verify hook closes completely and locks. Ensure there is no slack that would increase fall distance.
- Verify system before work: Tug on all connections to verify they hold. Check that lanyard is not twisted and has clear path between harness and anchor. Confirm shock pack indicator shows not deployed.
- Work within protected radius: Stay within 6 feet of anchor point. Do not create excess slack in lanyard. Maintain awareness of fall hazards and lanyard position.
- Reposition as needed: When moving to new work area, disconnect from current anchor and reconnect to new anchor point before releasing from old anchor. Maintain continuous connection.
- Disassemble and store: At end of work, disconnect lanyard from anchor and harness. Coil lanyard loosely and return all components to storage bucket. Store in dry location protected from UV, chemicals, and physical damage.
Pro Tip: The 6-foot lanyard length is measured from hook to hook before shock deployment. During a fall, the shock pack extends approximately 3.5 feet, creating a maximum total length of approximately 9.5 feet. Account for this when calculating fall clearancethe anchor must be high enough that the worker cannot contact a lower level during a fully deployed arrest.
Full Body Harness. 6ft Shock Lanyard. Dual Snap Hooks. Storage Bucket.
Start a chat for fastest response or email [email protected].
Mon-Fri 7am-4pm | Sat 8am-12pm PST | (503) 850-6784
Frequently Asked Questions
Does this kit include an anchor? +
No. This kit includes the harness and lanyardthe personal protective equipment that connects the worker to the anchor. The anchor point must be provided separately based on your specific application (scaffolding tie-off, aerial lift anchor, roof anchor, horizontal lifeline, etc.). If you need an anchor included, consider a complete bucket kit with roof anchor.
What sizes does the harness fit? +
The harness has adjustable shoulder, chest, and leg straps that accommodate most adult workers within the OSHA-specified weight range of 130 to 310 pounds including tools. Proper fit requires adjusting all straps so the harness is snug but not restrictive, with the dorsal D-ring centered between the shoulder blades.
How much fall clearance do I need? +
Calculate fall clearance as: lanyard length (6ft) + shock pack extension (3.5ft) + harness stretch and D-ring slide (1ft) + worker height below D-ring (5ft) + safety margin (2ft minimum) = approximately 17.5 feet minimum clearance below the anchor point. If clearance is less than this, use a shorter lanyard or self-retracting lifeline instead.
What is the return policy? +
GutterAll offers a 30-day return window for unused fall protection equipment in original packaging. Used, damaged, or equipment that has been deployed in a fall is not eligible for return. Contact [email protected] or call (503) 850-6784 to initiate a return. Refunds are processed within 5 to 7 business days. Return shipping is the buyer’s responsibility unless due to defect or shipping error.
How does shipping work? +
Orders ship via standard carrier to all 50 states with tracking from the Damascus, Oregon warehouse. Typical transit time is 3 to 7 business days depending on destination. In-store pickup at 19759 SE Sunnyside Rd, Damascus, OR 97089 is available Monday through Friday 7am to 4pm and Saturday 8am to 12pm PST. Local delivery within the Damascus and Portland metro area is also available.
Is contractor volume pricing available? +
Yes. Contractor volume pricing is available for fall safety kits purchased in quantities for crews. Contact [email protected] or call (503) 850-6784 for contractor account pricing on multi-unit orders.
Critical Safety Notice
THIS IS LIFE SAFETY EQUIPMENT. IMPROPER USE CAN RESULT IN SERIOUS INJURY OR DEATH. Inspect harness and lanyard before each use. Ensure harness fits properly with dorsal D-ring centered between shoulder blades. Connect lanyard only to anchor points rated for fall arrest (5,000 lbs per worker). Calculate fall clearance before useminimum approximately 17.5 feet below anchor for this 6ft lanyard. Remove kit from service after any fall eventdeployed shock packs cannot be reused. Training in proper use is required before use. Follow all manufacturer instructions and OSHA regulations.
Order Fall Safety KitHarness and Lanyard for Contractor Protection
Full body harness with dorsal D-ring. 6ft shock absorbing lanyard with dual snap hooks. Storage bucket included.
Add to Cart
Nationwide shipping | Local delivery | In-store pickup available
Volume orders and contractor pricing: [email protected]
Mon-Fri 7am-4pm | Sat 8am-12pm PST | (503) 850-6784
Fall Safety KitAt a Glance
Full Body Harness. 6ft Shock Lanyard. Dual Snap Hooks. Storage Bucket. OSHA Compliant. Use with existing anchor points.
GutterAllProfessional Gutter Tools and Safety Equipment
Address19759 SE Sunnyside Rd
Damascus, OR 97089
HoursMon-Fri: 7am-4pm PST
Sat: 8am-12pm PST
Email[email protected]
Phone(503) 850-6784
