This Hanging Down Light comes with Lighting Shrink Professional crimp and heat shrink cable connector
LAMP: AR11, 2W, 2700K, 60 MR16, 4W, 2700K, 60
FINISH: Machined copper, machined brass
USE: Down lighting techniques in trees or architecture by hanging on a chain or cable
INSTALLING THE FIXTURE
1. Unscrew the fixture body from the base.
2. Install the lamp in the socket
3. Reinstall the fixture body.
HANGING THE FIXTURE
IMPORTANT: DO NOT INSTALL ON, OR NEAR ANY HIGH VOLTAGE POWER LINES
1. Hang the fixture from a secure stainless steel eye bolt, with or without a chain.
2. Create a drip loop with the wire by bending the wire to a slope one inch below the fixture cap
Specs
AR11 Lamp Specifications:
Wattage: 2
Lumens: 120
Beam Spread: 30°
Kelvin Temperature: 2700K
Operating Range: 8-25VAC
Replaces: 20W Halogen
CRI: 85
IP: 61
Chipset: CREE
Lamp Life (hours): 50,000
MR16 Lamp Specifications:
Wattage: 5
Beam Spread: 15 Degrees
Lumens: 380
Kelvin Temperature: 2700K
Operating Range: 8-25 VAC/DC
Replaces: 20W, 35W, 50W Halogen
CRI: 85
IP: 61
Lamp Life (hours): 50,000
G4 Blaze Specifications:
Wattage: 2W
Kelvin Temperature:1400-1700
Volt Amps:3.33
Lumens:20-120
Operating Range:8-24 VAC/DC
IP:65
Lamp Life (hours):30,000
Warranty (years):3
Lamp Type:G4 Bi-Pin
