Name: 4×5 45 Degree Type A Downspout Elbow | Aluminum
Brand: topfixhardwareus.com
SKU: SVELBOWS48685
Price: 38.03 USD
Availability: InStock

4×5 Profile45 Degree BendType A Front CrimpCorrugated Aluminum32 Colors

4×5 Aluminum 45 Degree Type A Downspout Elbow

Create a cleaner offset between the gutter outlet and wall-mounted downspout with a large-profile Type A elbow built for compatible 4×5 drainage systems.

4×5 Large Profile
45 Degree Bend
Type A Front Crimp
Corrugated Body
32 Factory Colors

A Downspout Run Only Works as Well as the Elbow That Routes It

When the elbow does not match the downspout size, angle, or Type A connection style, installers fight the fit. The run can land out of alignment, the joint can look forced, and water routing can become harder to control at the exact point where the gutter outlet needs a clean transition.

The 4×5 Aluminum 45 Degree Type A Downspout Elbow solves that fit problem for compatible systems: it gives gutter crews a large-profile corrugated elbow with a smoother 45-degree offset, Type A front-crimp orientation, and color options that help the finished downspout run look intentional instead of improvised.

Built for Cleaner Offsets in Larger Downspout Layouts

4×5 Downspout Fit

Designed for compatible 4×5 rectangular downspout systems where a larger profile is part of the drainage layout.

45 Degree Offset

The 45-degree bend supports a smoother transition from gutter outlet toward the downspout run when a sharp 75-degree turn is not needed.

Type A Front Crimp

Built for systems that require Type A orientation. Confirm the connection direction before ordering to avoid a wrong-style fitting.

32 Factory Colors

Color and material options help match gutters, downspouts, siding, trim, commercial facades, and project specifications.

Made for Gutter Crews Who Need the Offset to Fit the System

The 4×5 Aluminum 45 Degree Type A Downspout Elbow is a corrugated gutter fitting used to change direction in compatible 4×5 downspout systems. The uploaded listing identifies the product as a 4×5 aluminum 45-degree Type A elbow with corrugated/ribbed profile, 32 factory colors, contractor pack options, and SKU GA-ELB-4X5-45-A.

For gutter installers, the value is clean routing without forcing the wrong part. The 4×5 profile supports compatible larger downspout systems, the 45-degree bend helps create a smoother offset, and the Type A front-crimp configuration matches systems built for that connection style.

For commercial contractors, large residential installers, gutter cleaning contractors, repair crews, property managers, and DIY homeowners, this elbow is useful when replacing a damaged fitting, building a new offset, or correcting a downspout run that needs a better-aligned gutter-to-wall transition.

GutterAll in Damascus, OR supports contractors and homeowners with elbow type selection, 4×5 size matching, color selection, in-store pickup, local delivery, and nationwide shipping. Website chat is the fastest way to confirm Type A orientation, color, and fit before ordering.

Product Key Specs 4×5 Aluminum 45 Degree Type A Downspout Elbow 4×5 corrugated aluminum downspout elbow with 45-degree bend, Type A front-crimp configuration, 32 factory colors, contractor pack options, and SKU GA-ELB-4X5-45-A listed in the uploaded product details.

The Real Pain Point Is Alignment: Size, Bend, and Type Have to Work Together

A downspout elbow is a small part with a big effect on the finished run. If the fitting is the wrong size, the wrong Type A/Type B orientation, or the wrong bend angle, the installer may end up with a gap, a twisted connection, poor wall alignment, or a drainage path that looks patched together.

This elbow solves that practical jobsite problem by combining the larger 4×5 profile with a 45-degree offset and Type A front-crimp setup. It gives the installer a defined fitting for compatible systems instead of relying on a workaround that can create rework later.

The best result comes from confirming the 4×5 profile, Type A orientation, outlet location, offset distance, color, fastening method, and final discharge direction before installation.

Where This Elbow Creates the Most Value

Application Why It Helps 4×5 downspout installations Fits compatible larger-profile aluminum downspout systems when a 45-degree Type A elbow is required. Gutter outlet to wall offsets Helps transition from the gutter outlet toward the wall-mounted downspout run without forcing a mismatched angle. Commercial and large residential drainage Supports projects that use compatible 4×5 downspout systems for larger drainage layouts. Type A replacement work Replaces a damaged, missing, crushed, or mismatched Type A elbow on compatible 4×5 systems. Color-matched exterior projects 32 factory colors help match downspouts, gutters, trim, siding, metal packages, and architectural finishes.

How the Type A Elbow Works

A Type A downspout elbow is used where the system needs the forward/back routing style associated with A-style elbows. The 45-degree bend helps create an offset between the gutter outlet and the downspout run while maintaining a smoother angle than sharper fittings.

The installer should dry-fit the elbow, confirm the crimp direction, check the offset, and secure the joint with compatible sheet metal screws, rivets, or the approved fastening method for the system. Public product references support that 4×5 .027 gauge A-style 45-degree aluminum elbows fit 4×5 aluminum downspouts and are used to get a downspout over ledges, pipes, or protrusions.

Choose the Elbow Based on the System

This Product: 4×5 Type A 45

Best when the job uses compatible 4×5 downspout and needs a 45-degree Type A front-crimp elbow.

Type B Elbow

Better when the system requires side-to-side routing or Type B/back-crimp orientation. Confirm seam and connection direction before ordering.

75 or Different Size

Better when the installation requires a sharper transition or the system uses 2×3, 3×4, round, or another downspout profile.

Key Features

Feature Technical Detail User Benefit 4×5 profile Large rectangular downspout elbow size Supports compatible large-profile downspout systems. 45-degree bend Offset elbow angle listed in uploaded product details Helps create a smoother gutter outlet to downspout transition. Type A configuration Front-crimp orientation listed in uploaded product details Matches systems that require a Type A elbow instead of Type B. Corrugated ribbed construction Ribbed aluminum body listed in uploaded product details Adds shape rigidity and matches corrugated downspout component appearance. 32 factory colors Color count listed in uploaded product details Supports color-matched gutter, downspout, trim, siding, and architectural work. Contractor pack options Box of 36 and White Box 30 pieces listed in uploaded details Supports repeated installs, service stock, and project staging.

Quick Decision Summary

Choose the 4×5 Aluminum 45 Degree Type A Downspout Elbow when the system uses compatible 4×5 downspout, needs a smoother 45-degree offset, and requires Type A front-crimp orientation. Confirm size, angle, crimp style, color, and fastening method before installation.

Benefits Crews Notice Fast

Fits compatible 4×5 aluminum downspout systems
45-degree bend supports smoother offset routing
Type A front-crimp orientation helps match the correct system connection
Corrugated ribs help the fitting hold its formed shape
Works for new installs, replacements, service repairs, and routing corrections
Useful for commercial and large residential gutter systems
Helps avoid forcing a wrong-style elbow into the run
Helps avoid ordering Type B when Type A is needed
Supports cleaner outlet-to-wall alignment
32 factory colors support exterior matching
Contractor pack options support repeated jobs and truck stock
Useful around ledges, offsets, protrusions, and downspout transition details
Pairs with compatible 4×5 downspouts and fittings
Helps keep the finished downspout run looking intentional
Supported by GutterAll sizing and orientation guidance through website chat

Product Specifications

Specification Details Product Name 4×5 Aluminum 45 Degree Type A Downspout Elbow Product Type Downspout elbow / gutter bend / conductor elbow / drain fitting Profile Size 4×5 inch rectangular downspout profile Angle 45 degrees Configuration Type A / front crimp Material Aluminum; uploaded details also list Galvalume Plus and solid copper options as material/finish variants Profile Style Corrugated / ribbed Finish Factory-applied finish listed in uploaded details Color Options 32 factory colors listed in uploaded product details Contractor Pack Options Box of 36 and White Box 30 pieces listed in uploaded product details SKU GA-ELB-4X5-45-A Primary Application Routing compatible 4×5 downspouts through 45-degree gutter outlet to downspout transitions Best Fit Commercial buildings, large residential systems, offset transitions, replacement elbows, Type A repairs, and color-matched downspout work Compatibility Check Confirm 4×5 size, Type A crimp direction, 45-degree angle, color, outlet path, downspout seam orientation, and fastening method before ordering Not Intended For 2×3 or 3×4 systems, Type B-only connections, round downspouts, wrong-profile systems, structural support, or forced-fit installations Expected Service Life Varies by installation quality, fastening method, exposure, debris load, ice/snow conditions, impact, corrosion environment, coating care, and whether the elbow is matched to the correct system. Fulfillment Options In-store pickup, local delivery, and nationwide shipping through Shopify checkout

Who Uses This 4×5 Type A Elbow?

Gutter Installers

Routing 4×5 downspouts from gutter outlets to wall-mounted runs
Building smoother offset transitions with a 45-degree Type A elbow
Matching color and fitting orientation for cleaner exterior installations

Gutter Cleaning Contractors

Replacing crushed, loose, missing, or mismatched 4×5 Type A elbows during service
Correcting alignment problems discovered during cleaning or repair
Helping customers maintain runoff direction through compatible large downspout systems

DIY Homeowners and Property Managers

Replacing a matching 4×5 Type A elbow on a compatible downspout system
Confirming profile size, crimp direction, angle, and color before buying
Restoring a cleaner connection between the gutter outlet and downspout run

Setup and Installation Guide

Confirm the downspout system uses a compatible 4×5 rectangular profile.
Verify that the job requires a Type A / front-crimp elbow rather than a Type B elbow.
Confirm the 45-degree bend is the correct angle for the outlet-to-wall offset.
Select the color or material option that best matches the gutter, downspout, trim, siding, or project specification.
Dry-fit the elbow at the gutter outlet or downspout connection before fastening.
Check that water will flow in the correct direction and that the elbow does not force the run out of alignment.
Secure the joint with compatible sheet metal screws, rivets, or the approved fastening method for the system.
Support the connected downspout run with properly spaced brackets or straps.
Test with water to confirm direction, joint fit, and drainage path.
Inspect periodically for loose fasteners, impact damage, debris blockage, separation, or coating damage.

Pro Tip

Confirm Type A orientation before selecting the color. A perfect color match will not fix the wrong elbow style, and forcing the wrong crimp direction can create alignment problems at the outlet or downspout connection.

Frequently Asked Questions

What is the 4×5 Aluminum 45 Degree Type A Downspout Elbow used for?

It is used to create a 45-degree direction change in compatible 4×5 downspout systems, especially where the gutter outlet needs a smoother offset into the wall-mounted downspout run.

How is Type A different from Type B?

A-style elbows route forward or backward from the downspout, while B-style elbows route side-to-side. Type A and Type B fittings are not interchangeable for every layout, so the system orientation should be confirmed before ordering.

When does a 45-degree elbow make sense?

A 45-degree elbow makes sense when the installation needs a smoother offset from the gutter outlet toward the downspout, such as a standard transition around a ledge, protrusion, or outlet-to-wall spacing.

Are contractor pack options available?

The uploaded product details list Box of 36 and White Box 30-piece options. Website chat is the fastest way to confirm color, quantity, pack configuration, and ordering details.

What is GutterAll’s return policy for this product?

GutterAll offers a 30-day return window for unused products in original condition. Once installed, scratched, dented, crushed, cut, drilled, altered, fastened, or damaged, returns are not accepted unless the product is defective. Customers can contact [email protected] or call (503) 850-6784 to initiate a return. Refunds are processed within 5 to 7 business days. Return shipping is the buyer’s responsibility unless the return is due to defect or shipping error.

What shipping and fulfillment options are available?

Orders ship via standard carrier to all 50 states with tracking from the Damascus, Oregon warehouse. Typical transit time is 3 to 7 business days depending on destination. In-store pickup at 19759 SE Sunnyside Rd, Damascus, OR 97089 is available Monday through Friday 7am to 4pm PST and Saturday 8am to 2pm PST. Local delivery within the Damascus and Portland metro area is also available.

Installation and Jobsite Safety Notice

Use ladder safety, gloves, eye protection, and proper fall-prevention practices when working at gutter height. Aluminum edges, drilled holes, screws, rivets, and cut downspout sections can be sharp.

Do not force the wrong size, angle, or elbow style into the system. A poor fit can separate, leak, restrict drainage, deform the elbow, or create a weak connection during heavy runoff.

Confirm that the completed downspout path discharges water away from the structure, walkways, neighboring property, and areas where concentrated runoff may create erosion or ice hazards.

Need Help Confirming Type A, Angle, or Color?

The right elbow depends on the 4×5 profile, Type A orientation, bend angle, outlet location, downspout routing, and exterior color. Website chat is the fastest way to confirm the correct fitting before checkout.

Fastest Path

Start with website chat for Type A orientation, 4×5 sizing, angle, color, and routing questions.

Contractor Support

Get help matching elbows with outlets, downspouts, straps, screws, extensions, and larger gutter layouts.

Fulfillment Options

In-store pickup, local delivery, and nationwide shipping are available through Shopify checkout.

Product Summary Box

The 4×5 Aluminum 45 Degree Type A Downspout Elbow is a corrugated gutter fitting for compatible large-profile downspout systems. It helps installers create smoother outlet-to-wall offsets, match Type A front-crimp orientation, and finish the downspout run with a color-matched aluminum component.