- Fits milling machines with less than 32″ total X-, Y-, and Z-axis travel
- Displays on any Android tablet with Bluetooth capability
- Resolution of 0.0002″ (0.005 mm)
- 120-240 VAC Power supply
- Coolant and dust resistant (IP50)
This magnetic technology digital readout package fits virtually any milling machine with less than 31.8″ total X-, Y-, and Z-axis travel.
This kit includes 1 meter (39.4″) of magnetic scale that you cut to the lengths required for your machine. The instructions tell you how to measure and cut the magnetic scale.
This package includes what you need to put a DRO on most any milling (or 3-in-one) machine. It includes a section of scale, three read heads, and a Bluetooth transceiver.Typical mounting bracket designs are included in the instructions. However, due to the wide range of possible applications, appropriate brackets cannot be supplied.
You must also get an Android tablet for the display on this DRO. We recommend a 7″ screen size, and the tablet must have Bluetooth capability.
***NOTE: This is not a simple “plug in” accessory that requires installation. Please review the instructions in Chris’s Tips before purchase.
| Repeatability | 0.0002″ (0.005 mm) |
| Resolution | 0.0002″ (0.005 mm) |
| Specified Accuracy | 0.0020″ (0.050 mm) /1 m travel |
| Accuracy / Foot | 0.0020″ (0.050 mm) |
| Accuracy / 100 Mm | 0.0020″ (0.050 mm) |
| Scales Cut to Lengthby User | Yes |
| Scale Technology | Magnetic |
| Scale Protection | Coolant & dust resistant |
| Voltage | 100-240 V |
| Clear to Zero | Yes |
| Direct Entry of Position | Yes |
| Inch/mm Display | Yes |
| Power Off Memory | No |
| Reversible Count Direction | Yes |
| Find Center | Yes |
| Bolt Circles | Yes |
| Bolt Lines | Yes |
| Preset Points | Yes |
| Tool Offsets | Yes |
| Radius/Diameter | Yes |
| Incremental/Absolute | Yes |
| Calculator | No |
| Arc Machining | No |
| Linear Error Compensation | No |
| Made In | China |
| Warranty | 1 year |
| Phone Tech Support | Free |
